4 channel Hikvision network video recorder for IP cameras. Supports up to 4 2-Megapixel Hikvision IP cameras.
Easy two-step plug & play installation - just connect your Hikvision IP camera to one of the PoE ports on your NVR, connect the NVR to a monitor/TV and your system is ready! No extra PoE switch needed with this NVR.
Features:
- Third-party network cameras supported.
- 4 network cameras can be connected simultaneously with 40Mbps incoming bandwidth.
- Up to 2 Megapixels resolution recording (25 FPS per channel).
- HDMI and VGA output at up to 1920×1080P resolution.
- Remote footage review and device management via Internet using your PC/tablet/smartphone (via free app).
- 4 independent PoE network interfaces - one for each camera, where a single Ethernet cable is used for power and connection to the network, so no additional power cables required - fast and easy installation.
- Multiple recording options: continuous, schedule, motion detection.
- Maximum 6TB Hard Drive capacity.
- Controlled with USB mouse.
- Power supply – 48V DC.
- Free device management software including iOS and Android applications.
- 36 months warranty.
- We fully test and configure this device before shipping at no extra charge!
We recommend using Hikvision IP cameras with this NVR to ensure full compatibility and easy setup.
Technical specifications:
IP video input: | | | 4-ch |
Two-way audio input: | | | 1-ch, RCA (2.0 Vp-p, 1kΩ) |
Network | ||
---|---|---|
Incoming bandwidth: | | | 25Mbps |
Outgoing bandwidth: | | | 40Mbps |
Remote connection: | | | 128 |
Video/Audio Output | ||
HDMI/VGA output: | | | 1-ch, resolution: 1920 × 1080P /60Hz, 1280 × 1024 /60Hz, 1280 × 720 /60Hz, 1024 × 768 /60Hz |
Audio Output: | | | 1-ch, RCA (Linear, 1kΩ) |
Decoding | ||
Live view / Playback: | | | 1080P /UXGA /720P /VGA /4CIF /DCIF /2CIF /CIF /QCIF |
Capability: | | | 4-ch@720P, 2-ch@1080P |
Hard Disk | ||
SATA: | | | 1 SATA interface for 1 HDD |
Capacity: | | | Up to 4TB for each disk |
External Interface | ||
Network Interface: | | | 1 RJ-45 10 / 100 Mbps selfadaptive Ethernet interface |
USB Interface: | | | 2, USB2.0 |
POE | ||
Interface: | | | 4 independent 10 /100 Mbps PoE Ethernet interfaces |
Max. Power: | | | 35W |
Supported Standard: | | | AF |
General | ||
Power Supply: | | | 48V DC |
Consumption(without hard disk and POE): | | | ≤ 6 W |
Working Temperature: | | | -10 ºC ~ +55 ºC (+14 ºF~ + 131 ºF) |
Working Humidity: | | | 10 % ~ 90 % |
Chassis: | | | 1U chassis |
Dimensions: | | | 255 × 205 × 45 mm |
Weight(without HDD): | | | ≤ 1 Kg |
Warranty Information
60 months (5 years) extended warranty is included.