Image sensor |
1/3” Progressive Scan CMOS |
Min. illumination |
0.07 Lux @(F1.2,AGC ON), 0 Lux with IR |
0.1 Lux @(F1.4,AGC ON), 0 Lux with IR |
|
Shutter time |
1/3 s to 1/100,000 s |
Lens |
12mm |
Lens mount |
M12 |
Day & night |
ICR |
Digital noise reduction |
3D DNR |
Wide dynamic range |
Digital WDR |
Video compression |
H.264 / MJPEG |
H.264 codec profile |
BaseLine Profile / Main Profile |
Bit rate |
32 Kbps ~ 12 Mbps |
Dual Stream |
Yes |
Max. Image Resolution |
2048 × 1536 |
Frame rate |
50Hz: 20fps (2048 × 1536), 25fps (1920 × |
1080), 25fps (1280 × 720) |
|
60Hz: 20fps (2048 × 1536), 30fps (1920 × |
|
1080), 30fps (1280 × 720) |
|
Image settings |
Rotate mode, Saturation, Brightness, Contrast adjustable by client software or web |
browser |
|
Backlight compensation |
Yes, zone optional |
ROI |
Yes, up to 4 configurable areas |
Network storage |
NAS |
Alarm trigger |
Motion detection, tampering alarm, scene change detection, face detection, |
intrusion detection, Line crossing detection |
|
Protocols |
TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, |
SMTP, SNMP, IGMP, 802.1X, QoS, IPv6, Bonjour |
|
System compatibility |
ONVIF, PSIA, CGI, ISAPI |
General functionalities |
User Authentication, Watermark, IP address filtering, Anonymous access |
Communication interface |
1 RJ45 10M / 100M Ethernet interface |
Operating conditions |
-30 °C ~ 60 °C (-22°F ~ 140 °F) humidity 95% or less (non-condensing) |
Power supply |
12 VDC ± 10% , PoE (802.3af ) |
Power consumption |
-I8: max. 10W |
Ingress protection level |
IP66 |
IR range |
-I8: 4pcs EXIR LEDs, up to 80m |
Dimensions |
Φ105mm×300mm |
Weight |
1200g |
60 months (5 years) extended warranty is included.